|
|
|
Interior Wrought Iron Balusters
( for Interior wrought iron stairs and Railings
)
|
|
|
| |
All metal components are powder coated in textured
black NOT just spray painted, to offer every client 10x
greater scratch resistance then a standard, spray painted
finish. Thus looks new longer, with a richer overall appearance.
- For custom colouring it is possible to order without a finish. |
| |
#0034 1/2"
SQUARE Metal Spindles (Hollow Tube) |
| |
 |
1/2" square metal bar, typically in 44" lengths
with one end rounded for easier installation. |
| |
#0085 Decorative
Collar (for 1/2" square bar) |
| |
 |
Decorative collars (slide over bar from above, with set screw
to hold in place) |
| |
#0080 Foot (for 1/2" square bar) |
| |
 |
Decorative Foot to accept metal bar above, used when installing
spindles horizontally |
| |
#0080 Angle Shoe (for 1/2" square bar) |
| |
 |
Decorative Angle Shoe to accept 1/2" metal bar above, used when installing
spindles down a stringer or for underside of handrail |
| |
#0090 2 piece Swivel
Foot (for 1/2" square bar) |
| |
 |
Two piece swivel, to accept metal bar above for angled installation,
either on a stringer or on the underside of a handrail that
is running down steps. (picture on left) |
| |
#0140 Decorative
SQUARE Spoon Spindle (Solid Bar) |
| |
 |
One piece square metal spindle with decorative collar
welded in place and flanged above and below. |
| |
1/2" ROUND Metal Spindles (Hollow Tube) |
| |
|
One piece hollow round metal spindle, 1/2" in diameter to match the spindles below.... more info |
| |
Decorative
ROUND Thin Cage Spindle
(Hollow Tube) |
| |
 |
One piece 1/2" round metal spindle with one long thin cage welded in the middle of the wrought iron baluster.. more info |
| |
ROUND Metal Spindle with 1 or 2 Round Decoration |
| |
 |
One piece hollow round 1/2" metal spindle, with one or two round decorations welded in place. Matched with the plain round spindle above.... more info |
| |
ROUND Metal Spindle with 1 or 2 Square Decoration |
| |
 |
Hollow round metal spindle, 1/2" in diameter with one or two square decorations. Typically used in combination with 1/2" round bar... more info |
| |
#0300 9/16" ROUND
Metal Spindles (solid bar) |
| |
|
9/16" ROUND solid metal bar, typically in 44" lengths |
| |
#0340 9/16" Decorative
ROUND Spoon Spindle (Solid Bar) |
| |
|
One piece solid round metal spindle with round decorative
collar welded in place and flanged (or spooned) above and below.
(same as #0140 above but this is a round spindle rather than
square one).. must use 9/16" round spindles, just above, to match. |
| |
Metal Handrail Bracket |
| |
 |
for wall mounting handrail
(see photo on the left) currently only available in plain
metal.. can use spray paint to tint to your required colour |
| |
Recommended Handrail & Base Rail
|
| |
#4004 2 3/4"
Handrail -no groove |
| |
 |
1 3/4" x 2 3/4"
-designed for dowel topped spindles or wrought iron spindles
with rocker plates |
| |
#4221 Base Rail:
3/4" x 3 1/4" |
| |
 |
3/4" x 3 1/4"
- sits on the floor to accept end of the spindles for horizontal
railings |
| |
For Newel Posts:
Colonial
Newel Posts >> more info
Box Newels
>> more info
Square
Newels >> more info
|
 |
|
|
-
- - - >> HOME
>> OUR PRODUCTS >>
Wrought Iron Railings
