|Lacasse Fine Wood Products Inc.||search our site|
Most of these mouldings are carried in stock in Oak, pine, maple and a great wood for painting. On special order we are able to manufacturer them in almost any type of wood, as long as we can get the wood :)
SIZE: 3/4" x 2 1/2"
-sold by random length or a set that includes 2 pieces 7' & 1 piece 3', other header sizes can be made up on order.
Application: A casing is typically used around doors and windows. Because doors are all 7' high, to reduce wastage and make sure you get enough 7' legs for either side of your door, casing is typically sold in "sets", where one "set" includes enough wood to trim one side of one door.
For windows it is less important to get specific sizes because usually you need lots of different lengths and can cut to get the best yield as you trim out each window, starting with the largest and working towards the smallest pieces needed. Thus for windows, most clients buy bundles of random length casing 3'-12'.
Size: 11/16" x 3 1/2"
- sold based on random footage from 3'-12', approximately 120' per bundle
- you usually design a baseboard to be somewhat higher than its matching casing and slightly thinner so that it backsets itself from the rounded edge of the casing where it meets at the bottom of the door frame.
Size: 11/16 x 5"
- sold based on random footage from 3'-12', approximately 70' per bundle
Size: 3/4" x 2 1/2"
-set includes 2 pieces 7' & 1 piece 3', other header sizes can be made up on order.
Size: 11/16" x 4 1/4"
- sold based on random footage from 3'-12', approximately 100' per bundle
Size: 3/4" x 3"
- made to be reversable depending on what set of flutes you prefer
Size: 13/16" x 3" square or 3.5" square
- sold by the piece, usually designed to be at least 1/2" bigger than the width of the casing you are matching
Application: Installed at the top of the door, or in the corners of the windows, in lieu of mitering the casing at the corners.
Size: 1 1/16" x 3" or 3.5" x 7"
- sold per piece, trim to required height
Application: used at the base of the door, and casing sits on top of this block.